Bosch Plena All-in-One Wall Panel

• Remote control for the Plena All‑in‑One Unit PLN‑6AIO240
• BGM routing and volume control
• Remote selection of four music source inputs
• Remote microphone/line input
• Powered from the Plena All‑in‑One Unit

The Plena Wall Panel PLN‑4S6Z is used to control the source selection, zone selection, and volume of the Plena All‑in‑One Unit PLN‑6AIO240 from a remote location, and accepts a microphone or music source.

System overview

The Wall Panel is connected to the Plena All‑in‑One Unit PLN‑6AIO240 with a standard Cat‑5 cable. The maximum cable length is 600 m. The buttons on the Wall Panel have the same function as the corresponding buttons on the front panel of the All‑in‑One Unit. The design and color of the Wall Panel are unobtrusive in any interior. Ease of installation, operation, and reliability are optimized in the design.

Functions

Remote zone and music source control
Six zones and four music input sources can be selected from a remote location. The Enable button on the front of the Wall Panel can be pressed to gain instant remote control over the music selection and master volume.

Indicators
The ON status of each zone and selected music source is indicated by an LED.

Connections and settings
The Wall Panel can be easily and quickly connected to the Plena All‑in‑One Unit, by using a Cat‑5 cable and RJ45 connectors. Configuration is not necessary.

Control and indicators
Front side:

• Selection buttons for six zones with All‑call
• Music source selection button
• Master volume control
• Enable button
• Level control for local audio input

Interconnections

• XLR connector for microphone
• 3.5 mm stereo connector for music source
• RJ45 connector (inside Wall Panel)

Open Datasheet